BIM Consulting

We at Enveetech can provide clients with a seamless transition from traditional 2D drawings and paper-based workflows into rapid prototype enabled 3D BIM models without extensive upfront investment in resources.

Our Specialities
  • Residential & Hospital Buildings

  • Industrial & Commercial Buildings

  • Offshore & Parking Structures

  • Apartment Blocks

  • General Contracting

  • High Rise and Low-Rise Buildings

  • Towers & Builder Homes

  • Institutional Buildings

  • Additional and Renovation Projects

Service Capabilities
  • Structural Detailing

  • Steel Detailing

  • Rebar Detailing

  • Stairs

  • Pre-Cast Detailing

  • MEP BIM

  • Structural BIM with Revit

Deliverables
  • BIM Training & Audit

  • BIM Automation & Coordination

  • BIM Implementation Plans

  • BIM Clash Detection

  • BIM Object Libraries

  • Model Template Creation

  • On-Site BIM Support & Team

  • Bill of Materials & Quantity

  • Material Take-offs

  • Design Calculations

  • Load Calculations

ENVEETECH BIM Consulting Company

We have in-house experts who come with a wealth of experience in carrying out the creation of 3D models in a seamless fashion in a quick time.

Enveetech - Our Specialties

We have a proven ourselves time and again about our capabilities in the BIM domain, which include:

best steel detailing services
High Rise and Low-Rise Buildings

We have the necessary expertise in conceiving and designing both high-rise and low-rise buildings with equal ease.

Builder Homes

We have contributed to the construction of large construction projects executed by prominent builders in India and across the world.

Institutional Buildings

Our engineers and designers have contributed and have designed public institutional buildings across India and the world over.

Additional and Renovation Projects

We have the capability and experience in executing projects related to renovation for both large enterprises and individual customers.

Commercial Buildings

Our structural BIM 3D model team has been able to contribute to massive commercial projects with tight timeframes.

Residential buildings

We have conceived and developed BIM 3D models for residential projects both large and small across India and overseas.

Industrial Buildings

Our in-house designers have created 3D models for complex industrial structures with a high level of precision.

Offshore Structures

We have contributed to highly complex offshore structures that require a substantial amount of expertise and domain knowledge.

Hospital Buildings

We have contributed to vital healthcare projects that are relatively complex in their execution.

Parking Structures

Our engineers have conceived and designed a multitude of parking structures across the globe using 3D BIM models.

Apartment Blocks

Our in-house teams have designed and executed large apartment projects using 3D BIM modeling.

General Contracting

We have also provided our expertise to general contractors who are responsible for managing and coordinating building projects.

Towers

Our expertise, knowledge, and experience have been used in the construction of high utility communication and electrical towers.

We at Enveetech are known to provide an array of services to clients in BIM consulting which includes:

Enveetech - Services Capabilities

Structural BIM

We have the expertise, knowledge, and experience in providing structural BIM services for structural engineering projects.

Steel Detailing

We have in-house expertise for providing steel detailing services for guiding fabricators with the necessary details of a construction project.

Rebar Detailing

We have delivered on a multitude of projects in the rebar detailing space to equip ironworkers with the necessary BBS schedules.

Pre-Cast Detailing

Our engineers and designers come with the necessary experience in detailing pre-cast components for a pre-cast structure.

MEP BIM

We come with the necessary knowledge, expertise, and experience in overlaying MEP components for a construction project.

Structural BIM with Revit

Our engineers are known for delivering on structural BIM projects that help in the envisioning of the structural components of a building.

best steel detailing services

Enveetech – Our Deliverables

We come with the necessary expertise in providing our clients with the most relevant deliverable for a project, which are:

best steel detailing services
BIM Audit

Our team of engineers and designers are highly conversant at doing technical audits for BIM projects.

BIM Automation

We have in-house capabilities that allow us to provide solutions for repeated BIM tasks through automation.

BIM Implementation Plans

We can provide our clients with exhaustive strategic BIM plans giving guidance on how the project would be implemented.

BIM Coordination

Our team of experts is able to provide seamless solutions that allow us to coordinate architectural, structural, MEP systems within a building.

BIM Clash Detection

Our in-house teams can ensure there is no clash between the MEP components during the overlay process using BIM models.

BIM Object Libraries

We have object libraries with a large range of physical components that go into a construction project.

BIM Training

We have in-house expertise and talent for getting BIM training done for external firms in the most optimum manner.

Model Template Creation

We have the in-house capabilities for creating template designs for BIM 3D models right from scratch.

On-Site BIM Support

We can offer comprehensive support to building firms when it comes to the implementation of BIM models on site.

On-Site BIM Team

We have dedicated manpower resources that can be deployed at project sites for streamlining the project execution.

Bill of Materials

We are capable of providing precise estimates of materials and resources that would go into the construction of a project.

Bill of Quantity

We have in-house expertise in providing the exact quantities of materials that would into the completion of a project.

Material Take-offs

Our engineers and designers can provide you with quantities and types of material that would go into the construction of a project.

Design Calculations

Our engineers are capable of providing a complete set of design calculations with the utilization of BIM models.

Load Calculations

We have the knowledge, expertise, and experience in providing our clients with load calculations that are critical to any construction project.

Enveetech - Standards We Follow

We are a global company and remain committed to the stipulated standards prevalent in each country. Our designers are well versed with a different sets of standards that include:
  • International Energy Conservation Code (IECC)

    We follow the standards established by IECC when it comes to construction projects based out of the United States.

  • National Fire Protection Association Codes (NFPA)

    Our detailers strictly follow standards established by NFPA for projects that have fire protection systems associated with it.

  • Australian Standards for Maintenance of Fire Protection Systems & Equipment (AS1851-2005)

    We remain committed to following the technical standards established by Australian authorities when it comes to fire protection systems in Australia.

  • NBN Standards

    Our team of in-house experts is well versed with the technical standards prescribed by NBN standards prevalent in Belgium.

  • The American Society of Heating, Refrigerating and Air Conditioning Engineers standards (ASHRAE)

    We adhere to the standards established by ASHRAE for all projects that come with MEP components.

  • Australian Standards for use of mechanical ventilation and air conditioning in buildings (AS 1668.2)

    Our designers strictly follow standards established by Australian authorities for projects that are based out of Australia.

  • Joint Australian New Zealand Standard (AS/ NZ 3666)

    We follow the standards set by the joint AS/ NZ 3666 for the design, commissioning, installation, and operation of air handling and water systems in buildings.

  • American Society of Testing Materials (ASTM)

    We strictly follow standards established by ASTM for projects based out of the USA.

  • American Concrete Institute (ACI)

    Our detailers strictly follow standards established by ACI for projects that are based out of the USA.

  • Concrete Reinforcing Steel Institute (CRSI)

    Our detailers strictly follow standards established by CRSI for projects related to steel reinforced construction in the USA.

  • Australian Standards (AS)

    Our designers strictly follow standards established by AS for all projects that are based out of Australia.

  • New Zealand Standards (NZS)

    Our designers follow standards established by NZS for projects that are based out of New Zealand.

  • British Standards (BS)

    Our detailers strictly follow standards established by BS for projects that are based out of the United Kingdom.

  • National Institute of Steel Detailing (NISD)

    Our designers strictly follow standards established by NISD for steel detailing projects, especially in the USA.

  • American Institute of Steel Construction (AISC)

    Our detailers strictly follow standards established by AISC for projects pertaining to structural steel that is based out of the USA.

  • American National Standards Institute (ANSI)

    We follow the standards prescribed by the ANSI for most projects emanating from the West especially the USA.

  • Occupational Safety and Health Administration (OSHA)

    We follow the standards set forth by OSHA when it comes to designing of workplaces and associated areas.

  • South African Detailing Standards (SABS)

    Our detailers strictly follow standards established by SABS for projects that are based out of South Africa.

  • American Concrete Institute (ACI)

    Our detailers strictly follow standards established by ACI for projects that are based out of the USA.

We like to assure our potential clients that we are flexible when it comes to adherence to standards. It solely depends on the client’s requirements based upon which we can execute the project, we can even adapt quickly to new standards, if the client has specific requirements.

Enveetech – Technology Used

We are committed to using the latest technology for providing our clients with only state-of-the-art technology for all our project executions:
  • 3Ds Max

    Our designers and engineers are quite conversant with 3Ds max and use the software for creating realistic and detailed 3D models for a construction project of any size and scale.

  • Sketch Up

    We use Sketchup as the primary design software for creating 3D models. This happens to be one of the most prevalent software packages used by structural engineering firms.

  • Navis Works

    Navis works are known as an efficient software package that allows designers to open and combine 3D models in a streamlined fashion. It comes across essentially as a 3D design review package.

  • BIM 360

    This software package gives the in-house team capabilities to collaborate on the most complex of projects through project reviews and coordination workflows, it is cloud-based application software.

  • A360

    This again is a collaboration tool that allows the designers to review, share, and view both 2D and 3D design along with project files in one centralized location where they get stored.

  • Graphisoft ArchiCAD

    This happens to powerful suite built-in-tools with a user-friendly interface and is known for producing the best output for BIM models, it is particularly helpful with its intuitive interface.

  • Tekla Structures

    Our designers and engineers use this advanced software that allows the creation, management, and sharing of multi-material 3D models including steel, concrete, timber, and even glass.

  • RGS Rebar

    Our engineers use this software that allows the creation of BIM models for rebar detailing. This software has been customized to the needs of the global reinforced concrete industry and is known to be very efficient.

  • AutoDesk Revit

    This is software that is used by a whole range of stakeholders in structural engineering for creating 3D models including architects, landscape architects, and structural engineers.

  • AUTOCAD

    We use AutoCAD for drafting 2D designs which get fed into the BIM 3D software for creating realistic 3D models. Although AUTOCAD is an old application, it still finds relevance in 3D modeling.

We would like to state that in no way our engineers are restricted to the aforementioned software. It is completely up to the client to decide on software. We have past instances of having adapted new software in accordance with client requirements.

Client Stories

“Thanks to this BIM company , I got all my designs on time and erected them with perfection. The team of professional structural designers of Enveetech helped us to retain all our clients. I got all my work done by this amazing team from the first association with them. ”

Alex travelli

Founder & CEO

“As a fabricator, I am used to seeing a variety of shop drawings from various structural firms. But when I came across drawings from Enveetech, I was entirely convinced about the professional quality. All the drawings were accurate and detailed enough to make our jobs easier. The project got completed ahead of schedule and the final product had zero errors. All thanks to Enveetech! ”

Marc Anderson

Fabricator

“Our project was slightly more complicated than our previous projects and we were turned down by many firms. Finally, when we approached Enveetech we were expecting another negative response. But the structural engineers at Enveetech confidently assured us that they had the capabilities for executing the project and it was completed accurately within the time frame. ”

Chris Rickman

Contractor

Success!